<NAME>=*WARNING* Please read the following instructions: This program can enable DMA mode if it is supported by your IDE drives to speed up Video playback performance. If your IDE devices can not work properly after enable DMA mode, you can restore the old settings by executing this program again.
<HINT>=*─╡ºi* ╜╨╛\┼¬ñU¡▒¬║½ⁿÑ▄íGÑ╗╡{ªí»α¼░ºA╢}▒╥ IDE ╕╦╕m¬║ DMA ╝╥ªí¿╙Ñ[º╓╝v¡╡┐²⌐±¬║│t½╫íCªp¬GºA¬║ IDE ╕╦╕m╡L¬kªb DMA ╝╥ªíñUÑ┐▒`╣Bº@íAºAÑτÑiÑ╬Ñ╗╡{ªí¿╙┴┘¡∞╣w│]¡╚íC
&
<NAME>=Select IDE drives for which DMA mode will be enabled:
<HINT>=┐∩╛▄ºA¡n╢}▒╥ DMA ╝╥ªí¬║ IDE ╕╦╕míG
&
<NAME>=Press "Ok" or "Cancel" to exit this program. If you would like to perform Display and drives test. Please press "Diagnostic" button.
<NAME>=All of the selected devices have been successfully set into DMA mode. Press "Ok" to save new configuration or "Cancel" to restore original configuration.
<NAME>=There is at least one selected IDE drive that does not support DMA mode. Press "Ok" to save new configuration or "Cancel" to restore original configuration.
<NAME>=*WARNING* The backup data does not contain information for current devices. You should not restore original settings unless you really want to. Do you still want to restore original settings?
<NAME>=No IDE drive is found. Please check your devices or driver settings and replace any real mode CD/DVD-ROM driver with the 32-bit driver supplied by Windows.
<HINT>=Ñ╝╡o▓{Ñ⌠ª≤ IDE ╕╦╕míC╜╨└╦¼dºA¬║╕╦╕m⌐╬┼X░╩╡{ªí│]⌐wíA¿├Ñ╬ 32 ª∞ñ╕╝╥ªíñº┼X░╩╡{ªí¿╙¿·ÑNÑ⌠ª≤»u╣Ω╝╥ªí¬║ IDE ┼X░╩╡{ªííC
&
<NAME>=This program can only be executed under Windows95 or Windows98.
<HINT>=Ñ╗╡{ªíÑu»αªb Windows 95 ⌐╬ 98 ⌐╬º≤╖s¬║└⌠╣╥ñU░⌡ªµíC
&
<NAME>=The current IDE driver is %s and DMA mode has been enabled by default. Please refer to the corresponding documents of that driver for further details about enabling DMA mode.
<HINT>=ª╣ IDE ╕╦╕mñº DMA ╝╥ªíñw│Qª█░╩╢}▒╥íC╜╨░╤ª╥╕╙╕╦╕mñº¼█├÷ñσÑ≤íAÑHñF╕╤╕╙╕╦╕mñº DMA ╝╥ªí¬║╕╘▓╙╕Ω░TíC
&
<NAME>=Fail to get information of your IDE driver. Please check if the driver is installed correctly or contact your driver vendor to update new driver program.
<HINT>=╡L¬k¿·▒oª╣ IDE ╕╦╕mñº╕Ω░TíC╜╨└╦¼d╕╙╕╦╕m¼Oº_ªw╕╦Ñ┐╜TíA⌐╬¼ó╕╦╕m¿╤└│░╙ÑH¿·▒o╖s¬║┼X░╩╡{ªííC
&
<NAME>=Fail to get version information of your IDE device driver.
<HINT>=╡L¬k¿·▒oª╣ IDE ╕╦╕mñº¬⌐Ñ╗╕Ω░TíC
&
<NAME>=Fail to detect IDE drive. It mighty be caused by incompatible IDE driver which does not support your IDE devices.
<HINT>=╡L¬k░╗┤·¿∞ IDE ╕╦╕míC▒zÑi»αªw╕╦ñFñúñΣ┤⌐╕╙╕╦╕m¬║┼X░╩╡{ªííC
&
<NAME>=Fail to save backup data for restoring to original configuration later. You must enable DMA mode by yourself.
<HINT>=╡L¬k│╞Ñ≈╕Ω«╞íC▒zÑ▓╢╖ñΓ░╩╢}▒╥ DMA ╝╥ªííC
&
<NAME>=DMA mode has been mode changed.
<HINT>=DMA ╝╥ªíñw╕g┼▄º≤íC
&
<NAME>=All modification has been canceled.
<HINT>=⌐╥ª│¡╫º∩¬║│]⌐w¡╚¼╥│Q¿·«°íC
&
<NAME>=All your IDE drives have been set into DMA mode.
<HINT>=⌐╥ª│ IDE ╕╦╕m│úñw╢}▒╥ DMA ╝╥ªííC
&
<NAME>=Your IDE device driver does not support DMA mode. Please update your IDE device driver first.
<HINT>=▒z¬║ IDE ╕╦╕mñúñΣ┤⌐ DMA ╝╥ªííC╜╨Ѳº≤╖s▒z¬║ IDE ┼X░╩╡{ªííC
&
<NAME>=Intel 82371xB PCISet Device driver does not ready. Your system may not be best performance while playback DVD Video. You can press "Update" button to update Intel 82371x PCISet Device driver.
<NAME>=Since Windows 95 would not recognize the Intel 82371AB/EB chipset, the advanced functions, for example, DMA (also called bus mastering) provided by them could not be enabled. Intel has provided this patch, "Intel 82371xB INF Update Installer for Windows 95", to solve this problem. For further information, please check "readme.txt" incorporated with this patch.
<NAME>=Please insert PowerDVD CD-ROM Disc to drive: %s...
<HINT>=╜╨▒N PowerVCR CD ñ∙⌐±ñJ %s ╝╤ññ...
&
<NAME>=Some DVD-ROM drives do not follow the standard well and cause various problems when playing a copyright-protected(CSS) DVD title. Please insert a copyright-protected DVD title for compatiability test....
<HINT>=¼Y¿╟ DVD-ROM Ñ·║╨╛≈¿├Ñ╝º╣Ñ■┐φ┤`╖~¼╔╝╨╖╟íAª]ª╣ªb╝╜⌐±ñ@¿╟ª│¬⌐┼v½O┼@ (CSS) ¬║ DVD ╝vñ∙«╔íAÑi»α╖|╡oÑ═░▌├DíC╜╨⌐±ñJñ@ñ∙ª│¬⌐┼v½O┼@¬║ DVD ╝vñ∙íA╢iªµ¼█«e⌐╩┤·╕╒...
&
<NAME>=Diagnostic complete. The diagnoses have been output to %s. If PowerDVD can't work properly under your system. You can mail this log file to us. E-mail: support@cyberlink.com.tw Do you want to view this file now?
<NAME>=Your motherboard is using an ALi, SiS or VIA series of chipset. We strongly recommend you to install the IDE or bus master driver that comes with your motherboard and enable the DMA mode for accessing your IDE Devices. Not enabling DMA mode or using an improper IDE driver might either degrade the performance of PowerDVD or even prevent PowerVCR from properly executing. For more information about the IDE driver, please visit the web site of your motherboard vendor.
<HINT>=▒z¬║ÑD╛≈¬⌐¿╧Ñ╬ ALiíBSiS ⌐╬ VIA ┤╣ñ∙▓╒íCº┌¡╠▒j»P½╪─│▒z¿╧Ñ╬│╠╖s¬║ IDE ⌐╬ Bus Master ┼X░╩╡{ªííA¿╧ PowerVCR Ñi¿╧Ñ╬ DMA ╝╥ªíªs¿· IDE ╕╦╕míCÑ╝▒╥░╩ DMA ╝╥ªí⌐╬¿╧Ñ╬ñúÑ┐╜T¬║ IDE ┼X░╩╡{ªíÑi»α╖|¡░ºC PowerDVD ¬║░⌡ªµ«─»αíA⌐╬¼╞ª▄╛╔¡P PowerVCR ░⌡ªµñúÑ┐▒`íCª│├÷ IDE ┼X░╩╡{ªí¬║¿ΣÑL╕Ω░TíA╜╨│y│XÑD╛≈¬O╗s│y░╙¬║║⌠»╕íC
<NAME>=*WARNING* Please read the following instructions:\r\n\r\nThis program can enable DMA mode if it is supported by your DVD-ROM drives to speed up DVD Video playback performance. If your IDE devices can not work properly after enable DMA mode, you can restore the old settings by executing this program again.
<NAME>=Select DVD-ROM drives for which DMA mode will be enabled:
<HINT>=╜╨┐∩╛▄¡nÑ┤╢}ó╥ó█ó╧ªs¿·╝╥ªí¬║Ñ·║╨╛≈íG
&
<NAME>=\r\n\r\nPress ""OK"" or ""Cancel"" to exit this program. If you would like to perform Display and DVD-ROM test. Please press ""Diagnostic"" button.
<NAME>=No IDE CD/DVD-ROM drive is found. Please check your devices or driver settings and replace any real mode CD/DVD-ROM driver with the 32-bit driver supplied by Windows.
<NAME>=This program can only be executed under Windows95 or Windows98.
<HINT>=Ñ╗╡{ªíÑu»αªbWindows 95 ⌐╬¼O Windows 98 ñW░⌡ªµíC
&
<NAME>=The current IDE driver is %s and DMA mode has been enabled by default. Please refer to the corresponding documents of that driver for further details about enabling DMA mode.
<NAME>=Fail to get information of your IDE driver. Please check if the driver is installed correctly or contact your driver vendor to update new driver program.
<NAME>=Intel 82371xB PCISet Device driver does not ready. Your system may not be best performance while playback DVD Video. You can press ""Update"" button to update Intel 82371x PCISet Device driver.
<NAME>=Since Windows 95 would not recognize the Intel 82371AB/EB chipset, the advanced functions, for example, DMA (also called bus mastering) provided by them could not be enabled. Intel has provided this patch, ""Intel 82371xB INF Update Installer for Windows 95"", to solve this problem.\r\n\r\nFor further information, please check ""readme.txt"" incorporated with this patch.
<HINT>=Ñ╤⌐≤ Windows 95 ╡L¬k┐δ╗{ Intel 82371xB ┤╣ñ∙▓╒íCñ@¿╟╕√╖s¬║Ñ\»α¿╥ªp DMA ªs¿·╝╥ªí½Kª]ª╣ª╙╡L¬k┼X░╩íCIntel ┤ú¿╤ñFñ@¡╙¡╫╕╔╡{ªí ""Intel 82371xB INF Update Installer for Windows 95"" ÑiÑH╕╤¿M│o¡╙░▌├DíC\r\n\r\nªp¬G▒z╖Q▒o¬╛º≤ªh¬║░T«ºíA╜╨░╤ª╥¡╫╕╔╡{ªíñ║⌐╥¬■¬║ ""Readme.txt""└╔«╫íC
&
<NAME>=Explanation:
<HINT>=╗í⌐·íG
&
<NAME>=File not found (%s)!
<HINT>=ºΣñú¿∞└╔«╫ %síC
&
<NAME>=All of the selected devices have been successfully set into DMA mode. Press ""OK"" to save new configuration or ""Cancel"" to restore original configuration.
<NAME>=There is at least one selected CD/DVD-ROM drive that does not support DMA mode. Press ""OK"" to save new configuration or ""Cancel"" to restore original configuration.
<NAME>=*WARNING*\r\nThe backup data does not contain information for current devices. You should not restore original settings unless you really want to. Do you still want to restore original settings?
<NAME>=Please insert PowerDVD CD-ROM Disc to drive: %s...\n\n
<HINT>=╜╨▒N¡∞¬⌐Ñ·║╨⌐±ñJÑ·║╨╛≈ %s...\n\n
&
<NAME>=Some DVD-ROM drives do not follow the standard well and cause various problems when playing a copyright-protected(CSS) DVD title. Please insert a copyright-protected DVD title for compatiability test....
<NAME>=Diagnostic complete. The diagnoses have been output to %s. If PowerDVD can't work properly under your system. You can mail this log file to us. E-mail: powerdvd@gocyberlink.com\r\n\r\nDo you want to view this file now?\r\n\r\n
<NAME>=Your motherboard is using an ALi, SiS or VIA series of chipset. We strongly recommend you to install the IDE or bus master driver that comes with your motherboard and enable the DMA mode for accessing your DVD-ROM. Not enabling DMA mode or using an improper IDE driver might either degrade the performance of PowerDVD or even prevent PowerDVD from properly executing. For more information about the IDE driver, please visit the web site of your motherboard vendor.
<HINT>=▒z¬║ÑD╛≈¬OÑ╪½e¿╧Ñ╬ALi, SiS⌐╬VIA¿tªC¬║┤╣ñ∙▓╒íC½╪─│▒zªw╕╦Ñ╤ÑD╛≈¬O╝t░╙⌐╥┤ú¿╤¬║IDE (ºY Bus master) ┼X░╩╡{ªí¿├Ñ┤╢}DMA╝╥ªííCÑ╝╢}▒╥DMA╝╥ªí⌐╬¿╧Ñ╬ñúÑ┐╜T¬║IDE ┼X░╩╡{ªííAÑi»α╖|¡░ºCPowerDVD¬║░⌡ªµ«─▓víA⌐╬¼╞ª╙¿╧PowerDVD╡L¬kÑ┐▒`░⌡ªµíC ├÷⌐≤IDE┼X░╩╡{ªí¬║╕╘▓╙╕Ω«╞íA╜╨ª█ªµ░╤ª╥ªU¼█├÷╝t░╙¬║║⌠»╕íC
&
<NAME>=You are using Windows XP, we recommend you not to change the default DMA mode.